Computer CPU Water Blocks,Radiator. Red copper Backboard,Rubber
Gasket. AMD or INTEL Motherboard all-purpose.
1. Silver alloying brazing water block
The CPU water block MS-003-AC is made of pure copper material which is soldered by silver
alloying brazing different
From other water block locked by screws and plastic O-rings. With
the pure copper and silver alloying brazing
Manufacture, the CPU water block MS-003-AC presents outstanding heat transfer efficiency even if in low water
flow rate.
2. Intel and AMD socket compatibility & Easy installation.
The clips of CPU water block MS-003-AC supports INTEL LGA 2011/1366/1156/775 and AMD Socket
754/939/940/AM2/AM2+/AM3 platforms.
The universal strengthened back-plate not only prevents M/B
distortion but also has high compatible installation for all kinds
of MBs.
3. Nickel-Planted and mirror polishing treatment on copper base
The high quality nickel-plated and polishing treatment on the base
of the water block ensures excellent
Surface contact with heat source and enhances heat transfer
efficiency.
4. 3D micro-fin structure and inner micro channel design
CPU water block MS-003-AC adapts 3D micro-fin structure design to form compact inner micro
channel.
The compact micro-fin structure increases the surface area of heat
transfer to enhance thermal performance under low water flow rate.
5. Easy installation
The CPU WB MS-003-AC is easy to install the water cooling loop and the 1/4”(OD8mm / ID
6mm) and 3/8”(OD 12.7mm / ID 9.5mm) (G 1/4” thread )tube enables
upgrade to install series of water blocks. It is easy to replace
between 1/4”,3/8” and 1/2”tube.The horse clip (clamp) is also easy
to install. The clip of CPU water block MS-003-AC supports most of motherboard in the world.
CPU socket comatibility:
- Supports Intel LGA 775,LGA 1150/1155/1156,LGA1366 ,LGA2011
- Supports ADM Socket 939/754/940/AM2/AM2+/AM3/AM3+/FM2/FM2+
- Red Copper Backboard
- Roof cover, Two kinds of materials: POM black or PMMA transparent.
- The Bracket is stainless steel, plating finish.
- Standard interface
Specification:
Size: 50(L)*50(W)*15(H)mm
Installation size: 71-82mm, For 4-Holes(see drawing)
Material: 10mm Acrylic(Transparent), 1.5mm Stainless steel, 3mm Red
Copper.
Stainless steel Finish: Nickel/Chrome Mirror polishing treatment /
Black
Red copper Finish: Mirror polishing treatment
Weight: 120g
